We also have a video tutorial showing how to install the Fusion 360 post-processor.
To install and use a post processor for Fusion 360, follow these steps.
1. Enable Cloud Libraries in Fusion 360 by going cli...
Read article
Adjusting the V-Wheels
The first step is to locate the V-Wheels on your fully assembled X-Carve. The V-Wheels are categorized as either static or dynamic. The static V-Wheels are attached by a regular nylo...
Read article
If you're having trouble connecting to your machine, or if you don't see the green power light on the front of the X-Controller, please make sure your e-stop button is fully disengaged before reaching out for f...
Read article
Unfortunately, it is not possible to upgrade a ShapeOko 2 to the current model of the X-Carve without first upgrading to the X-Carve 2015 model. Here are the components you will want to purchase from our site i...
Read article
Upgrading from 500mm to 1000mm
While it seems easy to convert your machine from the 500mm size to the 1000mm X-Carve size, it can be expensive and will require a lot of time: you are essentially building a new...
Read article